 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
2-161. MAINTENANCE OF HULL DECK AND MISCELLANEOUS COMPONENTS (CONT).
REMOVAL (CONT)
Pull fuel filler cover latch radiator filler pin
6
(11) to release fuel filler access door (12).
7
Remove four square neck bolts (13), four
self-locking nuts (14), fuel filler access
door (12), fuel filler cover hinge plate
spacer (15), and fuel filler cover hinge
stepped spacer (16).
Remove spring pin (17) from fuel filler
8
cover latch radiator filler pin (11).
Remove fuel filler cover latch radiator filler
9
pin (11), helical compression spring (18),
and two flat washers (19) from hull bracket
(20).
NOTE
Step 10 is written for removal of left
fender extension step, but applies to
both left and right fender extension
steps.
Remove two cotter pins (21) and left
10
fender extension step (22).
Rotate nine driver's compartment cowl
11
turnlock fastener studs (23) one quarter
turn to release.
If any of nine driver's compartment cowl
12
turnlock fastener studs (23) or six retaining
rings (24) are damaged, remove driver's
compartment cowl turnlock fastener studs
or retaining rings from driver's
compartment aft cowl (25).
Remove antipilferage seal (26) from fire
13
extinguisher cable (27).
Loosen and slide nut (28) and fire
14
extinguisher control cable (27) from slot in
driver's compartment aft cowl (25), and
remove driver's compartment aft cowl.
2-930
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals