Removal/Disassembly - TM-9-2350-238-20-10945

TM 9-2350-238-20-1

1 Remove four hexagon head capscrews (1), four lockwashers (2), and air cleaner blower access

door assembly (3) from hull.

2 Remove 11 hexagon head capscrews (4), 11 Iockwashers (5), and battery access cover (6)

from hull.

3 Remove 16 hexagon head capscrews (7), 16 Iockwashers (8), 2 rear hydraulic access covers

(9), and 2 hydraulic access cover gaskets (10) from hull.

4 Remove two locknuts (11), two screws (12), and two preformed packings (13) from two unused

holes in the hull wall.

5 Remove cotter pin (14), slotted plain nut (15), flat washer (16), turret cover handle (17), flat

washer (18), and spring tension washer (19) from turret hull cleanout access door (20).

6 Remove two cotter pins (21), headless straight pin (22), turret hull cleanout assembly cover

(23), and turret hull cleanout cover gasket (24) from hull.

2-919