 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
Remove two capscrews (10), two
8
Iockwashers (11), and two loop clamps
(12) from tube assembly (9).
To avoid injury to personnel, do not
q
tighten or loosen hydraulic fittings
Loosen tube fitting locknut (13) on lockout
9
when system is pressurized.
switch tee (14).
Lower the boom to stowed position
q
Remove tube assembly (9) from lockout
10
before doing any maintenance on
switch tee (14).
hydraulic system.
Wipe up any spilled hydraulic fluid
11
Disconnect tube assembly (15) from
q
lockout switch tee (14).
to prevent injury to personnel.
Disconnect tube assembly (16) from
12
lockout switch tee (14).
Install covers on open hydraulic ports,
Remove lockout switch tee (14) with tube
13
tubes, and hoses immediately after
fitting locknut (13) from bulkhead.
disconnecting them to keep dirt out of
hydraulic system.
Remove tube fitting locknut (13) from
14
lockout switch tee (14).
NOTE
Access to suspension system
Remove tube assembly (16) from lockout
15
hydraulic fittings is gained through the
hull well.
switch tee (17).
Loosen tube fitting locknut (18) on lockout
1
16
Disconnect hose assembly (1) from tube
switch tee (17).
elbow (2).
Disconnect hose assembly (19) from
17
2
Loosen tube fitting locknut (3) on tube
lockout switch tee (17).
elbow (2).
Remove hose assembly (19) from tube
18
Remove tube elbow (2), tube fitting locknut
3
nipple (20).
(3), flat washer (4), and preformed packing
(5) from lockout cylinder (6).
19
Remove tube nipple (20) with preformed
4
Remove preformed packing (5), flat
packing (21 ) from lockout cylinder (22).
washer (4), and tube fitting locknut (3)
from tube elbow (2).
Remove preformed packing (21 ) from tube
20
nipple (20).
5
Remove hose assembly (1) from tube
21
elbow (7).
Disconnect tube assembly (23) from
lockout switch tee (17).
Loosen tube fitting locknut (8) on tube
6
22
Remove lockout switch tee (17) with tube
elbow (7).
fitting locknut (18) from bulkhead.
7
Remove tube elbow (7) with tube fitting
locknut (8) from tube assembly (9).
23
Remove tube fitting locknut (18) from
lockout switch tee (17).
2-907
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals