|
|
TM 9-2350-238-20-1
1 I n s t a l l new preformed packing (1) on tube nipple (2).
2 l n s t a l l tube nipple (2) with new preformed packing (1) on lockout cylinder (3).
3 I n s t a l l nonmetallic hose assembly (4) on tube nipple (2).
4 I n s t a l l new locknut (5) on tube elbow (6).
5 I n s t a l l tube elbow (6) with new locknut (5) on hull bracket.
6 I n s t a l l metal tube assembly (7) on tube elbow (6).
7 Tighten locknut (5) on tube elbow (6).
8 Connect nonmetallic hose assembly (4) to tube elbow (6).
9 Install new locknut (8) on tee (9).
10 Install tee (9) with new locknut (8) on hull bracket.
11 Install tube assembly (10) on tee (9).
12 Tighten locknut (8) on tee (9).
13 Install tube assembly (11) on lockout switch tee (12).
14 Connect tube assembly (11) to tee (9).
15 Install new preformed packing (13) on tube reducer (14).
16 Install tube reducer (14) with new preformed packing (13) on tee (9).
17 Connect metal tube assembly (7) to tube reducer (14).
18 Install three loop clamps (15), three new Iockwashers (16), and three screws (17) on tube
assembly (11 ).
19 Install four loop clamps (18), four new Iockwashers (19), and four screws (20) on metal tube
assembly (7).
20 Install new preformed packing (21) on tube nipple (22).
21 Install tube nipple (22) with new preformed packing (21) on lockout cylinder (23).
22 Install nonmetallic hose assembly (24) on tube nipple (22).
2-901
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |