Installation (Cont) - TM-9-2350-238-20-10879

TM 9-2350-238-20-1

NOTE

q Steps 7 thru 28 are written and illustrated for left side of vehicle but apply to both

sides.

Steps 7 thru 13 apply to installation of idler wheel or number 1 roadwheel.

7 Install idler wheel (12) or roadwheel (13).

8 Install ten new self-locking nuts (14).

9 Tighten ten new self-locking nuts (14) to 200 to 220 ft-lb (271 to 298 N-m) (lubricated) or 270 to

300 ft-lb (366 to 407 N-m) (dry).

10 Drive vehicle onto 4 x 4 x 24-in. (10 x 10 x 61-cm) wood block.

11 Unlock suspension.

12 Drive vehicle backward until idler wheel (12) or roadwheel (13) is off wood block. Remove

wood block.

13 Install track on top of roadwheels and trailing idler wheel.

2-853