 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
NOTE
Procedures are written for one road-
wheel arm and hub assembly but
apply to all roadwheel arm and hub
assemblies.
1 Using hub spacer replacer, install inner
arm and hub spacer (1) to arm (2).
2 Using hammer and seal guard replacer,
install dirt deflector (3) on arm (2).
3 Coat all metal-to-metal surfaces of new
plain encased seal (4) with sealing
compound.
4 Install new plain encased seal (4) in road-
wheel arm retainer (5), using seal inserter
(item 11, appx G) and remover and
replacer handle.
5 Install new gasket (6) and two lubrication
fittings (7) in roadwheel arm retainer (5).
6 Install roadwheel arm retainer (5) and new
roller bearing race (8) on upper spindle of
roadwheel pivot arm assembly (9).
7 Use a feeler gage to maintain clearance of
0.010 to 0.015 in. (0.254 to 0.381 mm)
between roller bearing race (8) and face of
roadwheel arm retainer (5).
2-839
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals