 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
6
Remove two hexagon head capscrews (6)
and two Iockwashers (7).
7
Remove anchor retainer (4) and gasket (8)
from torsion bar socket (5).
1 Inspect for broken, damaged, or missing
parts.
2 Clean surface of anchor retainer with dry
cleaning solvent.
3 Repair is by replacement of authorized
parts (TM 9-2350-238-2P-1).
1
Install new gasket (1) and torsion bar
socket (2) on anchor retainer (3).
Install two new Iockwashers (4) and two
2
hexagon head capscrews (5).
3
Coat splines (6) with grease.
4
Clean mating surfaces on hull with dry
cleaning solvent.
Install torsion bar socket (2) with attached
5
anchor retainer (3).
6
Ensure arrow (7) points toward front of
vehicle.
7
Install four new Iockwashers (8) and four
hexagon head capscrews (9).
2-835
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals