|
|
TM 9-2350-238-20-1
INSPECTION/REPAIR
1 Inspect for broken, damaged, or missing parts.
2 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).
Filter bowl must be tightened securely
in filter head. Do not back off filter
bowl to align Iockwire holes because
this will cause shutoff valve in filter
head to partly close, limiting oil flow
through filter.
NOTE
Filter kit contains two different sets of
preformed packings and packing
retainers. Check manufacturer's part
number and refer to TM 9-2350-238-
24P-1 when replacing preformed
packing and packing retainer in fluid
filter.
1
Install new preformed packing (1) and new
packing retainer (2) in filter head (3).
2
Install new preformed packing (4) on new
filter element (5).
Install new filter element (5) in filter bowl
3
(6) .
Install filter bowl (6) on filter head (3).
4
Install new Iockwire (7).
5
Set MASTER switch to ON.
6
2-805
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |