MAINTENANCE OF SHIFTING CONTROL AND LINKAGE.

TM 9-2350-238-20-1

INSPECTION/REPAIR

1 Inspect for broken, damaged, or missing parts.

2 For further disassembly, notify direct support maintenance.

3 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

REASSEMBLY/lNSTALLATION

1 Install tube cap (8) on oil drain tube assembly (4).

2 Install new preformed packing (7) on oil drain tube assembly (4).

3 Install oil drain tube assembly (4) on auxiliary drive assembly (6) and tighten tube fitting locknut

(5).

4 Install loop clamp (3) on oil drain tube assembly (4) and secure with new Iockwasher (2) and

hexagon head capscrew (1).

2-134. MAINTENANCE OF SHIFTING CONTROL AND LINKAGE.

This task covers:

a. Removal/Disassembly

c. Reassembly/lnstallation

b. Inspection/Repair

d. Adjustment

INITIAL SETUP

Materials/Parts

Cotter pin (2)

Lockwasher (7)

Lockwasher (2)

References

TM 9-2350-238-24P-1

Equipment Conditions

2-938 Hull transmission compartment deck assembly removed

2-935 Hull engine compartment deck assembly lid removed

2-775