 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
1
Disconnect electrical connector (1) from auxiliary drive assembly (2).
Tag and disconnect four electrical leads (3).
2
Remove four hexagon plain nuts (4), two flat washers (5), and two shoulder screws (6).
3
Remove Iockwire (7), two hexagon head capscrews (8), and angle bracket (9).
4
Remove Iockwire (10) and four hexagon head capscrews (11). Disconnect power takeoff drive
5
shaft (12) from auxiliary drive assembly (2).
Remove Iockwire (13) and four hexagon head capscrews (14). Disconnect magnetic clutch to
6
bearing unit drive shaft (15) from auxiliary drive assembly (2).
Remove self-locking nut (16), hexagon head capscrew (17), two sleeve spacers (18), and
7
rubber grommet (19) from connecting link (20).
Attach sling and carefully remove auxiliary drive assembly (2) and attached parts from hull
8
using hoist.
If damaged, remove Iockwire (21), six hexagon plain nuts (22), six hexagon head capscrews
9
(23), two mounting brackets (24), and two mounting plates (25).
Loosen screw and remove flat hose clamp (26). If damaged, remove boot (27).
10
1 Inspect for broken, damaged, or missing parts.
3 For further disassembly, notify direct support maintenance.
4 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).
2-767
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals