|
|
TM 9-2350-238-20-1
NOTE
Steps 19 thru 22 are written for one
final drive but apply to both final
drives.
Slide final drive pinion shaft (7) from inside
19
of final drive and engage with transmission
.
shaft (5).
20
Install output shaft retaining ring (6) on
final drive pinion shaft (7).
21 Slide final drive coupling nut (4) onto
transmission shaft (5). Tighten coupling
nut using drift and hammer, or spanner
wrench.
22 Install output drive cap (3), six new
Iockwashers (2), and six screws (1).
Tighten screws to 36 ft-lb (49 N-m).
2-755
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |