MAINTENANCE OF TRANSMISSION AND TRANSMISSION PLUGS.

TM 9-2350-238-20-1

1 Remove two plain nuts (1), two output shaft retainers (2), and four preformed packings (3) from

transmission (4).

2 Remove 12 hexagon head capscrews (5) and 4 Iockwashers (6) from 2 brake adjustment

covers (7).

3 Remove two brake adjustment covers (7) and two gaskets (8) from transmission (4).

4 Remove preformed packing (9) from speedometer adapter (10).

1 Inspect for broken, damaged, or missing parts.

2 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

1 Install new preformed packing (9) in speedometer adapter (10).

2 Install two new gaskets (8) and two brake adjustment covers (7) to transmission (4).

3 Secure 2 brake adjustment covers (7) to transmission (4) with 4 new Iockwashers (6) and 12

hexagon head capscrews (5).

4 Install four new preformed packings (3), two output shaft retainers (2), and two plain nuts (1) to

transmission (4).

2-127. MAINTENANCE OF TRANSMISSION AND TRANSMISSION PLUGS.

This task covers:

a. Removal

c. lnstalllation

b. lnspection/Repair

d. T e s t

INITIAL SETUP

Tools and Special Tools

Materials/Parts

Automotive maintenance and repair shop

Lockwasher (6)

equipment: organizational maintenance,

Metallic-encased gasket

common no. 1 (less power) (item 80,

References

Torque wrench (0 to 170 ft-lb)

TM 9-2350-238-24P-1

Pressure gage tester (item 28, appx G)

2-749