Click here to make tpub.com your Home Page

Page Title: Inspection/Repair
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2350-238-20-1
g. Tag and disconnect shell connector (7)
from suspension lockout system
Failure to remove or disconnect the
indicator light.
batteries before removing or installing
h. Tag and disconnect two shell
any electrical wiring harness or lead
may result in injury or damaged
connectors (8) from stoplight switch.
equipment.
Tag and disconnect plug connector (9)
3
from dimmer switch.
1 Wiring harnesses and leads are secured to
the hull and components with loop clamps,
Tag and disconnect plug connector (10)
4
straps, clips, ground screws, etc. Remove
from right headlight.
only the hardware which secures the
wiring harness or lead being removed.
Tag and disconnect plug connector (11)
5
from pressure switch.
2 Disconnect 23 shell connectors at the
following points:
Tag and disconnect plug connector (12)
6
from lighting switch.
Tag and disconnect seven shell
a.
connectors (1) from line connections.
Tag and disconnect plug connector (13)
7
from master relay.
Tag and disconnect two shell
b.
connectors (2) from horn switch.
Tag and disconnect plug connector (14)
8
from taillights.
Tag and disconnect shell connector (3)
c.
from forward air cleaner.
9
Remove lighting switch to vehicle
accessories and disconnect branched
Tag and disconnect six shell
d.
wiring harness (15) from hull through
connectors (4) from left headlight.
driver's compartment.
Tag and disconnect shell connector (5)
e.
from panel light.
f.
Tag and disconnect three shell
connectors (6) from infrared and
blackout drive selector switch.
For disassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.
4 Electrical wire and rod are manufactured
1 Inspect for broken, damaged, or missing
items, refer to appendix D.
parts.
5 Repair is by replacement of authorized
2 If damaged or missing, replace marker
parts (TM 9-2350-238-24P-1).
bands. Etch or stamp lead number on
new band.
3 For repair of shell connectors, refer to
general maintenance, page 2-371.
2-713

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business