 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
REMOVAL
3
For repair of cable terminals and shell
connectors, refer to general maintenance,
Failure to remove or disconnect bat-
teries before removing or installing
4
Electrical wire and insulation sleeving are
any electrical wiring harness or lead
may result in injury or damaged
manufactured items, refer to appendix D.
equipment.
Repair is by replacement of authorized
5
parts (TM 9-2350-238-24P-1).
1
Wiring harnesses and leads are secured to
the hull and components with loop clamps,
straps, clips, ground screws, etc. Remove
only the hardware which secures the
wiring harness or lead being removed.
For reassembly of wiring harness receptacle
connector, refer to general maintenance, page
Tag and disconnect three cable terminals
2
(1) from three generator control circuits,
terminals A, B, and D.
Tag and disconnect two shell connectors
3
(2) from circuit breaker.
1
Install generator control circuits to bracket
disconnect branched wiring harness (6) to
Tag and disconnect shell connector (3)
4
hull.
from line connection.
2
Connect receptacle connector (5) to
Remove four screws (4) and disconnect
5
bracket receptacle and install four screws
receptacle connector (5) from bracket
(4).
receptacle.
3
Untag and connect shell connector (3) to
Remove generator control circuits to
6
line connection.
bracket disconnect branched wiring
harness (6) from hull.
4
Untag and connect two shell connectors
(2) to circuit breaker.
5
Untag and connect three cable terminals
(1) to three generator control circuits,
For disassembly of wiring harness receptacle
connector, refer to general maintenance, page
terminals A, B, and D.
2-371.
Wiring harnesses and leads are secured to
6
the hull and components with loop clamps,
straps, clips, ground screws, etc. During
installation, make sure the wiring harness
1 Inspect for broken, damaged, or missing
or lead is secure and all hardware is tight.
parts.
2 If damaged or missing, replace marker
bands. Etch or stamp lead number on
new band.
2-699
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals