INSPECTION/REPAIR - TM-9-2350-238-20-10662

TM 9-2350-238-20-1

2-85. MAINTENANCE OF LOW ENGINE COOLANT WARNING INDICATOR LILGHT (CONT)

INSPECTION/REPAIR

1 Inspect for broken, damaged, or missing parts.

2 If enclosure is damaged, repair is by replacement of next higher assembly.

3 Electrical wire and insulation sleeving are manufactured items, refer to appendix D.

4 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

REASSEMBLY

1 If removed, install new sign (1).

2 U s i n g solder, solder electrical wires (2) to receptacle connector (3) per TB SIG-222.

3 Install electrical insert (4) on electrical wires (2).

4 Install bushing retainer nut (5) on receptacle connector (3).

5 i n s t a l l insulation sleeving (6) on electrical wires (2). Using solder, solder electrical wires to

indicator light socket (7).

6 Install receptacle connector (3) with attached parts in enclosure

7 Install four new Iockwashers (9) and four machine screws (10).

8 Install indicator light (11) on indicator light socket (7), and tighten nut (12).

2-636