|
|
TM 9-2350-236-20-1
3 Remove nonmetallic seal (8) from body
(4).
4 Remove two machine screws (9),
receptacle connector (10), preformed
packing (11), and electrical lead (7) from
body (4).
Loosen terminal screws R and W (12 and
5
13) and disconnect electrical leads (14
and 15). Do not remove terminal screws
R and W.
Remove two machine screws (16), two flat
6
washers (17), and lampholder (18).
Remove two machine screws (19), two
7
lockwashers (20), and lampholder (21).
Remove incandescent lamp (22), two
8
shoulder screws (23), lamp mounting plate
(24), and gasket (25) from lampholder
(18).
2-621
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |