 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-236-20-1
REASSEMBLY
1
Apply a light coat of silicone compound to
two sockets of lampholder assembly (1).
2
Install lampholder assembly (1) in parking
light (2) and secure using three machine
screws (3).
Install two new lockwashers (4) and two
3
machine screws (5).
Install clearance marker light (6) on lamp-
4
holder assembly (1). Insert screwdriver
into center slot of clearance marker light,
push in, and turn clockwise to secure.
Install vehicular stop light (7) on lamp-
5
holder assembly (1). Open cover of
vehicular stop light, push in, and turn
clockwise to secure. Close cover.
Install new preformed packing (8) to door
6
(9).
7
Install new lower lens nonmetallic seal
(10), lower light lens (11), and lower light
lens (12) on door (9).
Press light retention bracket (13) into door
8
(9).
Install new upper lens nonmetallic seal
9
(14), light lens (15), blackout filter (16),
and new upper lens gasket (17) on door
(9).
Press lens retainer (18) into door (9).
10
Apply antiseize compound to threads of
11
six machine screws (19).
If removed, install six new screw retaining
12
rings (20) and six machine screws (19) in
door (9).
13
Install door (9) on parking light (2).
Tighten six machine screws (19).
2-619
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals