ALIGNMENT - TM-9-2350-238-20-10626

TM 9-2350-238-20-1

2-79. MAINTENANCE OF HEADLIGHT, DOME LIGHT, WARNING LIGHT, AND

STOPLIGHT-TAILLIGHT INSTALLATION (CONT).

ALIGNMENT

1 Perform vertical (up and down) alignment as follows:

a. Loosen three screws (1).

b. Adjust headlight upward or downward until center spot of low beam is centered on aiming

line.

c. Hold headlight in adjustment and tighten three screws (1).

2 Perform horizontal (side-to-side) alignment as follows:

a. Loosen six screws (2).

b. Adjust headlight from side to side until center spot of low beam is centered on aiming line.

c. Hold headlight in adjustment and tighten six screws (2).

2-600