|
|
TM 9-2350-238-20-1
2-76. MAINTENANCE OF AIR BOX HEATER CONTROLS BRACKET ASSEMBLY.
a. Removal
b. Inspection/Repair
This task covers:
c. Installation
INITIAL SETUP
Matenals/Parts
Lockwasher (2)
References
TM 9-2350-238-24P-1
Equipment Conditions
MASTER switch set to OFF
2-640 Battery ground leads disconnected
General Safety Instructoins
Brake foot pedal is spring-loaded. Block tracks and release parking brake before
working on drivets instrument panel. Disconnect battery ground leads from battery
before working at rear of panel.
REMOVAL
Brake foot pedal is spring-loaded.
Block tracks and release parking
brake before working on driver's
instrument panel. Disconnect battery
ground leads from battery before
working at rear of panel.
1
Tag and disconnect all electrical leads
from air box heater toggle switch (1) and
pump and igniter toggle switch (2).
2
Remove four machine screws (3), air box
heater toggle switch (1), and pump and
igniter toggle switch (2) from angle bracket
(4) .
2-582
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |