|
|
TM 9-2350-238-20-1
2-70. MAINTENANCE OF STARTER RELAY AND RELATED ITEMS.
b. Inspection/Repair
a. Removal
c. Installation
This task covers:
INITIAL SETUP
Materials/Parts
Equipment Conditions
Lockwasher (2)
MASTER switch in OFF position
2-923 Engine fuel filter access door
removed
References
TM 9-22350-238-24P-1
NOTE
Instructions are written for removal of
electromagnetic relay which is
mounted on engine. The second
electromagnetic relay is attached to
the hull, near the audible warning
horn, without use of starter relay
mounting bracket.
1
Disconnect electrical lead (1) from
electromagnetic relay (2).
2
Remove two hexagon head capscrews (3),
two Iockwashers (4), and electromagnetic
relay (2) from starter relay mounting
bracket (5).
Remove two screws (6) and starter relay
3
mounting bracket (5) from engine (7). -
1 Inspect for broken, damaged, or missing parts.
2 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).
2-561
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |