|
|
TM 9-2356-238-20-1
2-66. MAINTENANCE OF COOLING SYSTEM FAN TENSIONER AND RELATED PARTS
(CONT)
Place sling (1) under vehicular drive (2).
1
2
Lift vehicular drive (2) and install new V-
belt (3) on clutch groove pulley (4).
Connect bearing unit drive shaft (5) to
3
vehicular drive (2).
Install four screws (6) in bearing unit drive
4
shaft (5).
NOTE
Secure bearing unit drive shaft with
crowbar when torqueing screws.
5
Torque screws (6) to 78 ft-lb (105 N-m).
If removed, install six flat washers (7), six
6
new Iockwashers (8), and six setscrews
(9).
Install control assembly (10) and fan cable
7
pulley (11), and secure with headed
straight pin (12) and new cotter pin (13).
2-548
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |