 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
2-66. MAINTENANCE OF COOLING SYSTEM FAN TENSlONER AND RELATED PARTS
(CONT).
REMOVAL (CONT)
Fan belt tensioner is under tension.
When removing nuts, care should be
taken to ensure safety of personnel.
Remove hexagon plain nut (1), self-locking
12
nut (2), concave washer (22), fan belt
tensioner (3), four hexagon head
capscrews (23), four Iockwashers (24),
and angle bracket (25).
Disconnect electrical connector (26).
13
Remove cotter pin (27), headed straight
14
pin (28), fan cable pulley (29), and control
assembly (30).
NOTE
Do not remove two angle brackets. If
angle brackets are damaged or
missing, notify direct support
maintenance.
If damaged, remove six setscrews (31),
15
six Iockwashers (32), and six flat washers
(33).
Remove four screws (34) from bearing
16
unit drive shaft (12).
17
Lower bearing unit drive shaft (12) out of
way.
Place sling (11) under vehicular drive (10)
18
and lift.
Remove V-belt (13) from clutch groove
19
pulley (35).
2-546
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals