Removal - TM-9-2350-238-20-10563

TM 9-2350-238-20-1

1 Loosen four hose clamps (1) and two nonmetallic hoses (2) securing water crossover tube (3)

to engine water outlet (4) and flange to tube elbow (5).

2 Slide hose clamps (1) and nonmetallic hoses (2) onto water crossover tube (3). Remove water

crossover tube.

3 Remove hose clamps (1) and nonmetallic hoses (2) from water crossover tube (3).

4 Remove machine bolt (6), flat washer (7), Iockwasher (8), and hexagon plain nut (9) securing

loop clamp (10) to angle bracket (11).

5 Loosen four hose clamps (12) and two nonmetallic hoses (13) securing water by-pass loop (14)

to thermostat cover (15) and water pump (16).

6 Slide hose clamps (12) and nonmetallic hoses (13) onto water by-pass tube (14). Remove

water by-pass tube.

7 Remove hose clamps (12) and nonmetallic hoses (13) from water by-pass tube (14).

8 Remove pipe plug (17) and pipe plug (18).

2-537