 |
|||
|
|
|||
|
Page Title:
MAINTENANCE OF COOLING SYSTEM HOSES, PIPES, AND RELATED PARTS. |
|
||
| ||||||||||
|
|
 TM 9-2350-238-20-1
1 Inspect for broken, damaged, or missing parts.
3 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).
1
Install surge tank assembly (3) and secure with four new Iockwashers (9), and four hexagon
head capscrews (8). Torque hexagon head capscrews to 20 to 23 ft-lb (27 to 31 N-m).
If removed, apply adhesive to new support beam rubber strip (7) and install.
2
Install pipe plug (6) and tighten.
3
Install pipe to tube elbow (5) to surge tank assembly (3).
4
Connect surge tank to engine manifold nonmetallic hose assembly (4) to pipe to tube elbow (5)
5
on surge tank assembly (3).
Connect rubber hose (2) to surge tank assembly (3) and install hose clamp (1).
6
Install new valve assembly (12), new gasket (11), and new retaining ring (10).
7
Install new rubber hose (14) with clamp (13).
8
2-62. MAINTENANCE OF COOLING SYSTEM HOSES, PIPES, AND RELATED PARTS.
This task covers:
c. Installation
a. Removal
b. Inspection/Repair
INITIAL SETUP
Materials/Parts
References
TM 9-2350-238-10
Adhesive (item 3, appx C)
TM 9-2350-238-24P-1
Hose (figure D-4, appx D)
Lockwasher
Lockwasher (8)
Equipment Conditions
Nonmetallic hose (figure D-5, appx D)
Cooling system drained
Nonmetallic hose (figure D-5, appx D)
(TM 9-2350-238-10)
Sealing compound (item 39, appx C)
2-529
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals