|
|
TM 9-2350-238-20-1
2-55. MAINTENANCE OF THROTTLE AND ACCELERATOR CONTROLS AND LINKAGE
(DRIVER'S COMPARTMENT) (CONT).
INSTALLATION (CONT)
NOTE
Install manual control lever (12).
4
If cotter pin or pin are damaged or
missing, a new clevis assembly must
Install sleeve bearing (13), accelerator
5
be ordered.
shaft (14), and machine key (15).
Install throttle plate (24), pin (25), and
9
Install flat washer (16) and new self-
6
cotter pin (26) on clevis assembly (27).
locking nut (17).
Install throttle plate (24), slotted plain nut
10
Install two new Iockwashers (18) and two
7
(28), and new cotter pin (29) on manual
hexagon head capscrews (19) on
control lever (12).
accelerator shaft (14).
Install two helical springs (20), two sleeve
8
bearings (21 ), control pedal (22), and
spring pin (23) on manual control lever
(12). Allow 0.005 in. (0.013 cm) minimum
play.
2-498
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |