|
|
TM 9-2350-238-20-1
1
Remove bolt (1), Iockwasher (2), and hose
clamp (3) with attached hose (4) from left
rear engine lifting bracket (5).
2
Disconnect hose (4) from elbow (6) on air
pump (7) and pipe to tube tee on front of
left cylinder head (8) of engine block.
3
Remove hose clamp (3) from hose (4).
4
Disconnect hose (9) from check valve
(lo).
Remove nuts (11 and 12) and disconnect
5
wiring harness leads (13 and 14) from
terminals on air pump (7).
6
Remove bolt (15), Iockwasher (16), flat washer (17), air pump clamp (18), cushion (19), and air
pump (7) from angle bracket (20).
7
Remove hose (21 ) and check valve (10) from adapter (22) on air pump (7). Remove hose from
check valve.
2-487
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |