|
|
TM 9-2350-238-20-1
DISASSEMBLY
1 Remove shoulder bolt (1) and gasket (2)
from fuel filter head (3).
2 Remove fluid filter body (4).
3 Remove and discard gasket (5) and filter
element (6) from fluid filter body (4).
4 Remove fluid filter drain nonmetallic hose
assembly (7) from fluid filter body (4).
INSPECTION/REPAIR
1 Inspect for broken, damaged, or missing
parts.
2 Clean fluid filter body and fluid filter head
with dry cleaning solvent.
3 Dry parts with low-pressure compressed
air.
4 Repair is by replacement of authorized parts (TM 9-2815-202-24P).
REASSEMBLY
1 Install fuel filter drain nonmetallic hose
assembly (1) on fluid filter body (2).
2 Close drain cock (3).
3 Fill fluid filter body (2) with fuel to within
approximately 1.0 in. (2.5 cm) from top.
4 Install new filter element (4) in fluid filter
body (2).
5 Install new gasket (5) in fluid filter head
(6) .
6 Install fluid filter body (2) on fluid filter
head (6) using new gasket (7) and
shoulder bolt (8).
2-473
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |