|
|
TM 9-2350-230-20-1
33 Remove two hexagon head capscrews (49), two Iockwashers (50), and cleaner basket mounting
bracket (51) from hull.
34 Remove six hexagon head capscrews (52), six Iockwashers (53), and six flat washers (54) from
hull.
35 Loosen hexagon head capscrew (55) and slotted plain nut (56).
36 Pull aft intake air cleaner (57) outward until there is 0.25 in. (0.64 cm) clearance between aft
intake air cleaner and hull.
37 Slide aft intake air cleaner (57) into space normally occupied by intake filter element.
38 Remove aft intake air cleaner (57) with duct gasket (58).
39 Remove eight assembled bolts (59) and retainer assembly (60) from aft intake air cleaner (57).
40 Remove duct gasket (58) from aft intake air cleaner (57).
41 If necessary, remove eight hexagon head capscrews (61), eight Iockwashers (62), blower
adapter air cleaner door (63), and gasket (64) from aft intake air cleaner (57).
42 If damaged, remove seal assembly (65).
43 If damaged, remove four hexagon head capscrews (66), four Iockwashers (67), and two
placement guide mounting brackets (68) from hull.
2-451
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |