Installation (Cont) - TM-9-2350-238-20-10452

TM 9-2350-238-20-1

2-37. MAINTENANCE OF EXTERNAL OIL LINES AND FITTINGS (UPPER ENGINE) (CONT).

lNSTALLATION (CONT)

27 Install drain cock (48) on angle bracket (49). Tighten nut (50) on drain cock.

28 Install pipe to tube elbow (51) on drain cock (48).

29 Connect nonmetallic hose assembly (47) to pipe to tube elbow (51).

30 Install loop clamp (52) on nonmetallic hose assembly (47). Install capscrew (53) on loop clamp.

31 Install two drain plugs (54) in fluid filter (15).

32 Run engine until operating temperature is reached. Refer to TM 9-2350-238-10. Check for oil

leaks.

33 Repair all leaks.

34 Check engine oil level.

35 Add engine oil as required. Refer to TM 9-2350-238-10.

2-426