|
|
TM 9-2350-238-20-1
NOTE
There are two filter elements housed
in the fluid filter. The following
procedure is written for the
installation of one, but applies to
both.
4
Install washer (9) in oil filter adapter (6).
5
Install new filter element (10) in shell (11).
6
Install shell (11 ) on oil filter adapter (6)
with drain plug hole (12) at lowest point,
and tighten shoulder bolt (13).
Install pipe bushing (14) on fluid filter (15).
7
Install oil filter cooler hose pipe to tube
8
elbow (16) on pipe bushing (14).
Install oil filter cooler nonmetallic hose
9
assembly (17) on oil filter cooler hose pipe
to tube elbow (16).
Install new preformed packing (18) and oil
10
filter cooler nonmetallic hose assembly
(17) on engine, and secure with four new
Iockwashers (19) and four hexagon head
capscrews (20).
2-423
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |