|
|
TM 9-2350-238-20-1
AY. MAGNETIC CLUTCH AND BYPASS SOLENOID VALVE CIRCUIT (MAGNETIC CLUTCH).
Disconnect connector from vehicular drive. Place red probe in socket A
Step 1.
(lead 317A). Ground black probe. Set MASTER switch ON. Set HYD
PUMP/PTO CLUTCH switch ON. If multimeter indicates about 24 volts, go
to step 2. If multimeter indicates no voltage, go to step 3. Set MASTER
switch OFF. Set HYD PUMP/PTO CLUTCH switch OFF. Connect
connector.
2-285
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |