|
|
TM 9-2350-238-20-1
Disconnect wiring harness from instrument (gage) panel. Place red probe
Step 6.
on pin B (lead 321) of receptacle. Ground black probe. Start engine and
run at 1000 to 1200 rpm. Check resistance and stop engine. If multimeter
indicates 4 to 9 ohms, repair lead 321 between plug and XMSN OIL
PRESS indicator. Refer to page 2-371. If multimeter indicates less than 4
ohms or more than 9 ohms, repair lead 321 between receptacle and
engine disconnect. Refer to page 2-371. Connect wiring harness to
instrument (gage) panel.
O. TRANSMISSION OIL TEMPERATURE INDICATOR CIRCUIT.
2-161
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |