STARTER CIRCUITS. (Cont) - TM-9-2350-238-20-10142

TM 9-2350-238-201

2-12. ELECTRICAL

TROUBLESHOOTING

Make sure MASTER switch is OFF before repairing

electrical circuits. Failure to observe this warning -

could result in injury to personnel.

Step 2.

To access engine disconnect and transmission, remove hull transmission

compartment deck assembly. Refer to page 2-938. Disconnect wiring

harness at engine disconnect. Place red probe in receptacle socket (lead

82). Ground black probe. Set MASTER switch ON. If multimeter

indicates no voltage, repair lead 82 from master relay to engine

disconnect. Refer to page 2-371. If multimeter indicates about 24 volts,

repair lead 82 or 14C from engine disconnect to starter control relay.

Refer to page 2-371. Set MASTER switch OFF. Connect wiring harness

at engine disconnect.

2-116