 |
|||
|
|
|||
|
Page Title:
Table 2-1. SERVICE UPON RECEIPT--M578 RECOVERY VEHICLE (Cont) |
|
||
| ||||||||||
|
|
 TM 9-2350-238-20-1
Table 2-1. SERVICE UPON RECEIPT-M578 RECOVERY VEHICLE (CONT)
REMARKS
ACTION
ITEM
LOCATION
Remove fan well deck.
a.
Fan Drive
Fan Well
Belts
Adjust tension of fan drive belts. Refer
b.
to TM 9-2350-238-10.
Remove engine cover.
a
Engine
Engine
Compart-
b.
Remove plastic caps from engine
ment
crankcase breathers.
Remove tape from turbocharger
c.
regulator exhaust pipe valve and engine
exhaust manifold elbow valve.
Remove plug or tape from air duct
d.
opening into driver's compartment.
Connect hose to opening and generator
e.
air duct.
Remove tape from engine oil filler cap
f.
and auxiliary drive fill and level caps.
Check lubricant level in engine,
g.
transmission, and auxiliary drive.
Check DD Form 1397 for oil viscosity
h.
used.
Install engine cover.
i.
To test engine for hydrostatic lock:
Engine
Driver's
Compart-
a.
Set MASTER and INST switches to ON.
ment
Hold ENGINE SHUTDOWN handle all
b.
the way out and press START push-
button switch.
Turn engine over at least two
c.
revolutions. If engine does not turn
over, refer to troubleshooting.
Release ENGINE SHUTDOWN handle.
d.
Set MASTER and INST switches to
e.
OFF.
2-11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals