Special Information - TM-9-2330-294-24P0010

TM 9-2330-294-24P

sequence. The NIIN consists of the last nine

(3) STOCK NUMBER column. This column lists

the NSN for the item.

(4) CAGEC co/umn. The Commercial and Gov-

When

digits of the NSN (i.e.,

ernment Entity (CAGE) Code (C) is a 5-digit alpha-

numeric code used to identify the manufacturer, distribu-

tor, or Government agency, etc., that supplies the item.

using this column to locate an item, ignore the first 4 dig-

its of the NSN. However, the complete NSN should be

(5) PART NUMBER column. Indicates the pri-

used when ordering items by stock number.

mary number used by the manufacturer (individual, firm,

corporation, or Government activity), which controls the

(2) F/G. column. This column lists the number of

design and characteristics of the item by means of its

the figure where the item is identified/located. The fig-

engineering drawings, specifications standards and in-

ures are in numerical order in Section II and Section III.

spection requirements to identify an item or range of

items.

(3) lTEM column. The item number identifies the

item associated with the figure listed in the adjacent

5. Special Information.

FIG. column. This item is also identified by the NSN

listed on the same line.

a. USABLE ON CODE. The usable on code appears

in the lower left comer of the Description column

b. PART NUMBER /NDEX. Part numbers in this index

heading. Not Applicable.

are listed by part number in ascending alphanumeric

sequence (i.e., vertical arrangement of letter and

b. FABRICATION INSTRUCTIONS. Bulk materials

number combination which places the first letter or digit

required to manufacture items are listed in the Bulk Ma-

of each group in order A through Z, followed by the

terial Functional Group of this RPSTL. Part numbers for

numbers O through 9 and each following letter or digit in

bulk materials are also referenced in the Description

like order).

column of the line item entry for the item to be manufac-

tured/fabricated. Detailed fabrication instructions for

(1) CAGEC column. The Commercial and Gov-

items source coded to be manufactured or fabricated

ernment Entity (CAGE) Code (C) is a 5-digit

are found in TM 92330-294-74.

alphanumeric code used to identify the manufacturer,

distributor, or Government agency, etc., that supplies

c. ASSEMBLY INSTRUCT/ONS. Detailed assembly

the item.

instructions for items source coded to be assembled

from component spare/repair parts are found in

(2) PART NUMBER co/umn. indicates the pri-

TM 9-2330-294-14. items that make up the assembly

mary number used by the manufacturer (individual, firm,

are listed immediately following the assembly item

corporation, or Government activity), which controls the

entry or reference is made to an applicable figure.

design and characteristics of the item by means of its

engineering drawings, specifications standards, and in-

d. KITS. Line item entries for repair parts kits appear

spection requirements to identify an item or range of

in group 9401 in Section II.

items.

e. /NDEX NUMBERS. items which have the word

(3) STOCK NUMBER column. This column lists

BULK in the figure column will have an index number

the NSN for the associated part number and manufac-

shown in the item number column. This index number is

turer identified in the PART NUMBER and CAGE

a cross-reference between the National Stock

columns to the left.

Number/Part Number index and the bulk material list in

Section II.

(4) F/G. co/umn. This column lists the number of

the figure where the item is identified/located in Sec-

f. ASSOCIATED PUBL/CAT/ONS. The publica-

tions Il and III.

tions listed below pertain to the Lowbed Semitrailer and

its components:

(5) ITEM column. The item number is that num-

ber assigned to the item as it appears in the figure

Short Title

Publication

referenced in the adjacent figure number column.

TM 9-2330-294-14

Lowbed Semitrailer, M747

c. FIGURE AND ITEM NUMBER INDEX.

6. How to Locate Repair Parts.

(1) FIG. column. This column lists the number of

the figure where the item is identified/located in Sec-

a. When National Stock Number or Part Number is

tions II and III.

Not Known:

(1) First. Using the table of contents, determine

(2) ITEM co/umn. The item number is that num-

the assembly group or subassembly group to which the

ber assigned to the item as it appears in the figure

item belongs. This is necessary since figures are pre-

referenced in the adjacent figure number column.