|
|
TM 9-2330-202-14&P
4-55.
SHOCK ABSORBERS REPLACEMENT (continued).
3. Inspect upper and lower mounting studs for cracks, bends, or bad threads. Notify Direct Support maintenance if
damaged.
4. Replace all damaged components.
c. INSTALLATION
1. Install two bushings (7), shock absorber (6) with thicker dust shield end at top, and two bushings (5) on upper and
lower mounting studs (2 and 3).
2. Install two recessed washers (4) and new self-locking nuts (1) on upper and lower mounting studs (2 and 3). Torque
self-locking nuts between 20 and 25 Ib-ft (27-34 Nm).
4-109
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |