Source Code - TM-9-2320-386-24P0014

TM 9-2320-386-24P

0001 00

Source Code. The source code tells you how to get an item needed for maintenance, repair, or overhaul

of an end item/equipment. Explanations of source codes follows:

Code

Explanation

Stocked items; use the applicable NSN to request/requisition items

with these source codes. They are authorized to the category

indicated by the code entered in the 3rd position of the SMR code.

PC**

** NOTE: Items coded PC are subject to deterioration.

Items with these codes are not to be requested/requisitioned

individually. They are part of a kit which is authorized to the

maintenance category indicated in the 3rd position of the SMR

code. The complete kit must be requisitioned and applied.

Items with these codes are not to be requested/requisitioned

MO- (Made at Unit Level)

individually. They must be made from bulk material which is

MF- (Made at DS Level)

identified by the part number in the DESCRIPTION AND USABLE

MH- (Made at Specialized

ON CODE (UOC) column and listed in the bulk material group of

Repair Act (SRA))

the repair parts list in the RPSTL. If the item is authorized to you

MD- (Made at Depot)

by the 3rd position code of the SMR code, but the source code

indicates it is made at a higher level, order the item from the

higher level of maintenance.

Items with these codes are not to be requested/requisitioned

AO-

(Assembled

Unit Level)

individually. The parts that make up the assembled item must be

AF-

(Assembled

DS Level)

requisitioned or fabricated and assembled at the level of

AH-

(Assembled

GS Level)

maintenance indicated by the source code. If the 3rd position code

AL-

(Assembled

SRA)

of the SMR code authorized you to replace the item, but the source

AD-

(Assembled

Depot)

code indicates the item is assembled at a higher level, order the

item from the higher level of maintenance.

XA-

Do not requisition an XA-coded item. Order its next higher assembly. (Also, refer to the note below.)

XB-

If an XB item is not available from salvage, order it using CAGEC and part number given.

XC-

Installation drawing, diagram, instruction sheet, field service drawing, that is identified by

manufacturer's part number.

XD-

Item is not stocked. Order an XD-coded item through normal supply channels using the CAGEC

and part number given, if no NSN is available.

NOTE

Cannibalization or controlled exchange, when authorized, may

be used as a source of supply for items with the above source

codes, except for those source coded XA.

Maintenance Code. Maintenance codes tell you the level(s) of maintenance authorized to USE and

REPAIR support items. The maintenance codes are entered in the third and fourth positions of the

SMR code as follows:

Third Position. The maintenance code entered in the third position tells you the lowest maintenance

level authorized to remove, replace, and use an item. The maintenance code entered in the third

position will indicate authorization to one of the following levels of maintenance.

Code

Application/Explanation

Crew or operator maintenance done within organizational maintenance.

Unit level can remove, replace, and use the item.

Direct support level can remove, replace, and use the item.

General support level can remove, replace, and use the item.

Specialized repair activity can remove, replace, and use the item.

Depot level can remove, replace, and use the item.

0001 00-2