Front Winch Hydraulic Oil Reservoir Level

TM 9-2320-386-10

3-7. CHECKING FLUID LEVELS (Contd)

d. Front Winch Hydraulic Oil Reservoir Level.

CAUTION

Before opening hydraulic reservoir, ensure area around reservoir

filler cap is clean. Do not allow dirt, dust, or water to enter

reservoir. Failure to do this may cause damage to internal

components.

(1)

Check oil level through sight glass (6) on hydraulic oil reservoir (5).

(2)

If oil level is not seen in sight glass (6), remove cap (4) and add oil as

necessary (table 2-2). Fill hydraulic oil reservoir (5) until oil level is

centered in sight glass (6).

e. Master Cylinder Reservoir Oil Level.

WARNING

Clean master cylinder reservoir filler cap and surrounding area

before removing cap. System contamination may result in injury to

personnel or damage to equipment.

(1)

Remove two filler caps (7) from master cylinder reservoir (8).

(2)

Check that oil level is to bottom ring of opening.

(3)

Fill master cylinder reservoir (8) to bottom ring of opening as necessary

(4)

Install two filler caps (7) on master cylinder reservoir (8).

Change 1

3-23