Click here to make tpub.com your Home Page

Page Title: Table 2-2. Operator/Crew Preventive Maintenance Checks and Services (Contd).
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-386-10
Table 2-2. Operator/Crew Preventive Maintenance Checks and Services (Contd).
ITEM TO
NOT FULLY
ITEM
INTERVAL
CHECK/
PROCEDURE
MISSION
NO.
SERVICE
CAPABLE IF:
VEHICLE EXTERIOR
ENGINE RUNNING
33
After
Air dryer
WARNING
Operation
(Contd)
When operating at temperatures
of 53F (12C) or below, make
1
sure air dryer moisture ejector
operates before shutting down
engine. Failure to do this may
result in equipment damage and
injury or death to personnel.
Check air dryer (1) for proper operation;
Air dryer moisture
listen for moisture ejector (2). Notify unit
ejector does not
maintenance if ejector valve is inoperative.
operate.
2
34
Exhaust
WARNING
system
Exhaust gases can kill. Operate
vehicle only in a well-ventilated
area. Failure to do this may result
in injury or death to personnel.
Do not touch hot exhaust system
components with bare hands.
Injury to personnel may result.
Hearing protection is required
when maintaining vehicle with
engine running.
Check exhaust pipes, exhaust guard,
Any major exhaust
couplings, and muffler for leaks and
leak or defective
loose clamps.
component.
CAUTION
35
Front
winch
Before opening hydraulic reservoir,
ensure area around reservoir filler
cap is clean. Do not allow dirt, dust,
or water to enter reservoir. Failure
to do this will cause damage to
internal components.
NOTE
If mission requires front winch
operation and winch is inopera-
tive, notify your supervisor.
Ensure vehicle is on level ground.
a. Check oil level in hydraulic
reservoir (5). Oil level should be
visible in sight glass (6). If low, remove
fillercap (3) and fill reservoir (5) with
oil until oil level is centered in sight
glass (6).
2-36
Change 1

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business