Tube Assembly

TM 9-2320-360-20-2

21-2. GAS PARTICULATE FILTER UNIT REPAIR (CONT)

e. Tube Assembly

WARNING

Sealing compound can burn easily, can give off harmful vapors, and is harmful to

skin and clothing. To avoid injury or death, keep away from open fire and use in

well-ventilated area.

If sealing compound gets on skin or clothing, wash

immediately with soap and water.

NOTE

Ensure mating ends of tube are smooth (free from ridges and burrs).

Ensure mating ends of tubes fit properly before proceeding.

(1) Wipe mating ends of tubes with methyl ethyl ketone.

NOTE

Tubes must be installed before bonding cement dries.

If bonding cement dries before installation, apply a new coat.

(2) Apply thick coat of bonding cement to male end of tube.

(3) Apply thin coat of bonding cement to female end of tube.

(4) Twist male end of tube into female end until fully seated. Hold until set.

f. Air Hose, Pipe, and Bracket Installation

NOTE

If pipes were removed, do steps (1)

thru (5).

(1) Install two brackets (1) on cab wall (2) with

two screws (3).

21-8