2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
19-6. ARCTIC KIT COOLANT PUMP REPLACEMENT (CONT)
(7) Remove two locknuts (20), screws (21),
and clamps (22) from support (23).
Discard locknuts.
(8) Remove coolant pump (7) from support
(23).
(9) Remove two locknuts (24), screws (25),
standoff bracket (26), and plate (27) from
support (23). Discard locknuts.
(10) Remove two elbows (28) from coolant
pump (7).
b. Installation
WARNING
Pipe thread sealing compound can
burn easily, can give off harmful
vapors, and is harmful to skin and
clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area.
If sealing
compound gets on skin or clothing,
wash immediately with soap and
water.
CAUTION
Use pipe thread sealing compound
sparingly only on pipe threads. Do
not apply compound to hose
connections. Damage to equipment
may result.
(1) Coat threads of two elbows (1) with pipe
thread sealing compound.
(2) Install two elbows (1) on coolant pump (2).
(3) Install plate (3) and standoff bracket (4) on
support (5) with two screws (6) and new
locknuts (7).
(4) Install coolant pump (2) on support (5).
(5) Install clamp (8) on support (5) with two
screws (9) and new locknuts (10).
19-24
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |