 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
b. Installation
WARNING
Ensure engine is cool before
performing maintenance. Failure to
comply may result in serious injury
to personnel.
Adhesive can burn easily, can give
off harmful vapors, and is harmful
to skin and clothing.
To avoid
injury or death, keep away from
open fire and use in well-ventilated
area. If adhesive gets on skin or
clothing, wash immediately with
soap and water.
NOTE
Do step (1) thru (8) and (14) through
(18) only if installing new battery box.
(1) Spray adhesive on inside of arctic battery
box cover (1). Install insulation panels (2
and 3).
CAUTION
Rubber grommets must be installed
correctly in holes on side of battery
box to prevent cables from shorting
out on box.
(2) Install two grommets (4) on battery box
(5).
(3) Secure screws (6) in battery box (5) with
plastic cable ties (7).
(4) Install four nuts (8) on screws (6).
(5) Position battery box (5) on platform (9).
(6) Install three screws (10) and new locknuts
(11) on battery box (5). Torque to 50 lb-ft
(68 Nm).
(7) Install two support hooks (12) on battery
box (5) with four screws (13) and new
locknuts (14).
19-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
