 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
18-6. MIRROR AND BRACKET REPLACEMENT (CONT)
(3) Remove two nuts (10), lockwashers (11), screws
(12), crossbars (4), and clamps (13) from mirror
bracket (14). Discard lockwashers.
(4) Loosen two nuts (15) and remove loop (16) from
two mirror brackets (9 and 14).
(5) Remove two nut glands (17) and nuts (15) from
loop (16).
d. Bracket Assembly
(1) Install two nuts (1) and nut glands (2) on loop
(3).
(2) Install loop (3) on mirror brackets (4 and 5).
(3) Install two clamps (6) and crossbars (7) on
mirror bracket (5) with two screws (8), new
lockwashers (9), and nuts (10). Do not tighten.
(4) Install two clamps (11) and crossbars (7) on
mirror bracket (4) with two screws (12), new
lockwashers (13), and nuts (14). Do not tighten.
(5) Install screw (15), new lockwasher (16), and nut
(17) on crossbars (7). Do not tighten.
18-16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
