2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
(3) Install yoke (7) on winch pump input shaft
(6) with aid of assistant.
WARNING
Adhesive-sealant can bum easily, can
give off harmful vapors, and is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well-ventilated
area. If adhesive-sealant gets on skin
or clothing, wash immediately with
soap and water.
(4) Coat threads of screw (10) with adhesive-
sealant.
(5) Install screw (10) on yoke (7).
(6) Install two screws (11) and new locknuts
(12) on center bearing (13).
(7) Install front shaft (14) on rear shaft (15).
(8) Install two new U-bolts (16), new
lockwashers (17), and four new nuts (18)
on universal joint (19). Torque to 13-18
lb-ft (17.6-24.4 Nm).
17-49
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |