2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
17-11. WINCH HYDRAULIC HOSES REPLACEMENT
This task covers:
Removal
Follow-On Maintenance
Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Winch reservoir drained (LO 9-2320-360-12).
Tags, Identification (Item 32, Appendix C)
Winch control console panels removed
Ties, Cable, Plastic (Item 34, Appendix C)
Locknut (Item 69, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 54, Appendix F)
Wrench, adjustable, automobile (Item 61.1,
NOTE
Tag and mark hoses before removal.
a. Auxiliary Winch Hose Removal
NOTE
Both auxiliary winch hoses
are
removed in a similar manner.
(1) Remove hose (1) from adapter (2) on
auxiliary winch counterbalance valve (3).
(2) Remove hose (1) from adapter (4) on
control valve (5).
NOTE
Locations of plastic cable ties should
be marked before removal.
(3) Remove plastic cable ties (6) from hose
(1), hose (7), and hose (8).
NOTE
Only one hose is held by clip.
(4) Remove screw (9) and cushion clip (10)
from winch platform (11) and hose (1).
(5) Remove hose (1) through cutout in winch
platform (11).
Change 1 17-23
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |