2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
16-35. VENT WINDOW REPLACEMENT
This task covers:
a. Removal
c. Installation
b. Cleaning/Inspection
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut off (TM 9-2320-360-10).
Adhesive-Sealant, Silicone (Item 3,
Parking brake on (TM 9-2320-360-10).
Wheels chocked.
Locknut s (14) (Item 44, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 54, Appendix F)
a. Removal
WARNING
Always wear eye protection and
protective clothing when handling
glass. Failure to comply may result
in injury.
NOTE
Vent windows in doors and rear cab
wall are replaced in a similar manner.
Do step (1) for door vent windows or
step (2) for rear cab vent windows.
(1) Remove ten locknuts (1), screws (2), and
vent window (3) from door (4). Discard
locknuts.
(2) Remove 14 locknuts ( ), screws (2), and
1
vent window (3) from rear cab wall (4).
Discard locknuts.
b. Cleaning/Inspection
Clean silicone sealant from door or rear cab
wall.
Change 2 16-135
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |