2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
c. Installation
(1) Install knob (1) on stud (2) and tighten jam
nut (3).
(2) Install two springs (4) in seat frame (5).
NOTE
Spring must be positioned outside of
washer and in front of main shaft.
(3) Fold down seat frame (5) and install two
screws (6) and new locknuts (7) in sides
of seat frame (5) while assistant holds
seat frame (5).
(4) Position seat (8) with bottom facing up.
(5) Connect spring (9) to pin (10) and shaft
(11).
(6) Install seat support (12) on cab floor (13)
with six screws (14) and new locknuts
(15).
16-57
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |