 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
16-7. HOOD ASSEMBLY REPAIR (CONT)
d. Installation
(1) Insert clevis pin (1) throug h holes in outer
arm hood lock (2) and inner arm hood lock
(3).
(2) Install washer (4) and new cotter pin (5)
on clevis pin (1).
(3) Install pin (6) in outer arm hood lock (2).
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well-ventilated
area. If adhesive-sealant gets on skin
or clothing, wash immediately with
soap and water.
(3.1) Coat threads of screw (9) with adhesive-
sealant.
(4) Install hood lock assembly (7) on radiator
(8) with screw (9) and washer (10).
WARNING
Hood weighs 235 lb (107 kg). Keep
out from under hood. Hood could fall
causing serious injury.
(5) Attach suitable lifting device to hood (11).
(6) Position hood (11) while assistant
operates lifting device.
NOTE
Clevis pins are installed from inside
out.
(7) Insert two clevis pins (12) through
eyebolts (13).
(8) Install two new cotter pins (14) in clevis
pins (12).
16-24 Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
