2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
14-2. PINTLE HOOK REPAIR
This task covers:
a. Removal
d. Installation
b. Disassembly
e. Follow-On Maintenance
c. Assembly
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut off (TM 9-2320-360-10).
Locknuts (2) (Item 59, Appendix G)
Parking brake on (TM 9-2320-360-10).
Pin, Cotter (Item 153, Appendix G)
Wheels chocked.
Pin, Cotter (Item 154, Appendix G)
Tools and Special Tools
Personnel Require d
Tool Kit, Genl Mech (Item 54, Appendix F)
Two
Socket Wrench Set, 3/4 In. Drive (Item 46,
Wrench, Torque, 0-600 Lb-Ft (Item 74,
a. Removal
(1) Remove cotter pin (1), nut (2), washer (3),
washer (4), and pintle hook (5) from two
mounts (6 and 7). Discard cotter pin.
(2) Remove two locknuts (8), screws (9), and
mounts (6 and 7) from rear crossmember
(10) with aid of assistant.
Discard
locknuts.
b. Disassembly
(1) Remove two grease fittings (1 and 2) from
mounts (3 and 4).
14-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |