 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
13-8. TEE GEAR BOX REPLACEMENT (CONT)
WARNING
Support tee gear box before
Installing
mounting
screws
to
prevent Injury.
CAUTION
Tee box must be installed so that
input shaft and rear output shaft turn
in same direction. Failure to do so
will result in reverse steering
response.
(3) Install four new lockwashers (12) and
screws (13) through mount (7) and tee
box (14) while assistant supports tee box
(14). Torque to 30 lb-ft (41 Nm).
(4) Rotate rear output shaft (5) to align key (2)
with slot (15) in rear steering shaft yoke
(16).
CAUTION
To install screws, holes in steering
shafts must align with grooves in tee
box shafts. Failure to install screws
through grooves may result in
steering
shafts
disconnecting,
causing damage to equipment.
(5) Install rear steering yoke (16) on rear
output shaft (5) with screw (17) and new
locknut (18). Torque to 35-40 lb-ft (48-54
Nm).
(6) Align key slot (19) with key (1) in front
output shaft (4).
(7) Install front steering yoke (20) on rear
output shaft (4) with screw (21) and new
locknut (22). Torque to 35-40 lb-ft (48-54
Nm).
(8) Rotate top steering shaft yoke (23) to align
key slot (24) with key (3) in input shaft (6).
(9) Install top steering shaft yoke (23) on input
shaft (6) with screw (24) and new locknut
(25). Torque to 35-40 lb-ft (48-54 N m).
13-38
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
